Brush Bandit 2900T, Operating & Parts Manual

Page: 30 / 94

Bandit
Copyright 1/07 PAGE 26
MODEL 2900T
Each day before starting your machine these checks must be made:
DAILY START UP & MAINTENANCE CHECK LIST
1) Check the safety decals and engine gauges, replace if damaged.
2) Check, maintain, and service all safety equipment for proper operation:
3) Check entire machine for loose nuts, bolts, and components.
4) Check all guards to make sure they are tight and securely in place.
5) Check the condition of the cutter wheel and teeth pockets.
6) Check the condition of the cutter teeth and hardware.
7) Properly torque cutter teeth bolts.
8) Grease (purge) all grinder bearings daily
9) Grease bottom pivot bushings with 1 to 2 shots.
10) Grease track expansion assembly with 1 to 2 shots.
11) Clean debris from poly chain guard.
12) Check and / or adjust poly chain belt tension and alignment.
13) Check and always maintain hydraulic oil level at 7/8 full.
14) Check all hoses, fittings, lines, and tanks for damage and fluid leaks.
15) Check fuel level. (Running out and repriming is time consuming).
16) Inspect, adjust, and lubricate tracks per manufacturer’s manual recommendations.
17) Check engine oil, coolant levels, and correct engine speed. Follow ENGINE
MANUFACTURER’S manual specs. Engine Must Be Level To Check Fluids.
18) Check radiator and debris screen. Clean as necessary. Clean cooling fan
and shroud on air cooled engines.
19) Check oil cooler and fan. Clean as necessary.
20) Check air cleaner and precleaner. Clean as necessary.
21) Check around the entire machine for any foreign objects, tools, cans, saws, etc.
22) Review all safety procedures on decals, from manual, and from video.
23) Wear all applicable safety equipment: hard hat, gloves, eye protection, ear
protection, etc.
24) Remember to check EVERYTHING on the checklist.
O.K. Repaired
MAINTENANCE SECTION