Brush Bandit 2000XP, Operating & Parts Manual, Page: 24 / 140

Bandit
Copyright 5/09 PAGE 8
MODELS 2000XP / 2100SP
SUPER SWEEP TERMINOLOGY
PPR
Mag Pick-up
Single Coil
Reverse Valve
Dual Coil
Reverse Valve
Solenoid
High
Low
Back
Pulses per revolution. On magnetic pick-up machines, this setting will be the number of teeth
on the gear or sprocket it is reading. On alternator pick-up machines, the setting will need to
be obtained from your local dealer or Bandit Industries.
Magnetic pick-up, also called pick-up probe. This is normally located screwed into the flywheel
housing on the engine block or the pump mount bolted on the engine. See Figure 1.
Machines built before 7/07 had a single coil reverse valve. It can be recognized by a valve with
one solenoid bolted on a square block. The solenoid is approximately 2-1/2” (63.5mm) diameter
x 2-3/4” (69.9mm) long. It will have two wires coming from it or on the newer machines it will have
a connector with a light screwed to it. When the solenoid is activated (indicated by the light in the
connector) the swing cylinders are reversed by the super sweep system. See Figure .
Machines built after 7/07 had a dual coil reverse valve. It can recognized by a valve with two
solenoids bolted on a square block. The solenoid is approximately 2-1/2” (63.5mm) diameter
x 2-3/4” (69.9mm) long. It will have two wires coming from it or on the newer machines it will
have a connector with a light screwed to it. The swing coil must have power (indicated by the
light in the connector) for the cylinders to swing the cutterhead. See Figure .
Electronically activated to produce a magnetic pull which shifts the spool inside the hydraulic
valve. Shifting of the spool changes oil flow direction in the swing cylinders.
High or HI is the setting when the cutter head swing will turn back on (grinding operation).
Low or LO is the setting when the super sweep system will stop and reverse the cutter head
swing.
Amount of time in seconds the cutterhead will back away from the stump. Normally this will
be set at .5 seconds.
SUPER SWEEP OPTION
Figure Figure
Figure
Connector
With Light
Figure