Brusa NLG664-U0, Technical Information And Start-Up

Page: 58 / 64

Technical information
and start-up
Fast Charger NLG6xx
58
9.2 Removing the charger
Procedure step Illustration / Other Information
1.
Disconnect the HV supply. Ensure that the HV
system is not live!
2.
Secure the system against restarting by
other personnel!
---
3. Disconnect the DC plug (1) from the charger.
DANGER
WARNING
High voltage!
Danger to life!
If the HV battery is activated, HV cables carry high voltage! Under no circumstances carry out
work on the device without first ensuring that there is no voltage in the HV system!
High voltage!
Danger to life!
After disconnecting the mains and DC connections, the charger requires approx. 5s to
discharge its capacitors. This time period must always be observed before carrying out further
work, in order to avoid electrical shocks!
Suspended loads!
Crushing hazard for feet!
When lifting the device out, it may fall down if the lifting equipment is not operated properly!
Do not operate lifting equipment without having received appropriate training!
Always act carefully and avoid jerking movements!