Brusa NLG664-U0, Technical Information And Start-Up

Page: 43 / 64

Technical information
and start-up
Fast Charger NLG6xx
43
7.1.4.7 Pin 11 Debug_CAN_H / Pin 12 Debug_CAN_L
INFORMATION

The Debug-CAN bus is designed for troubleshooting. Therefore, its data are only relevant for
the company BRUSA.

If an error occurs on the charger, the data of this CAN bus can also be logged by the customer.
This may be helpful in case of an in-depth system diagnosis.

The Debug-CAN bus must not be connected to the vehicle CAN bus, as this may lead to signal
disturbances in the CAN network of the vehicle due to bus overload.
Internal
wiring

CAN 2.0B, 500 kBaud

In the charger there is no termination (CAN-terminating resistor)

The CAN IDs cannot be configured.
Pin 12
DEBUG_CAN_L
Pin 11
DEBUG_CAN_H
33
pF
33
pF
TJA1043