Brusa BDC546, Technical Data And Start-Up

Page: 47 / 87

47
Technical data
and start-up
BDC546
The pre-assembled screws for the cable lugs of the power connections can be found under the service cap.

Required highside cable cross section: 70 mm²

Required lowside cable cross section: 95 mm²

Tightening torque of the screws for the cable lugs (3, 4, 5, 6): 13 Nm

Mount the cable fittings (1, 2) at the housing

Lowside tightening torque: M32 x 1.5 with 45 Nm

Highside tightening torque: M25 x 1.5 with 35 Nm

Use the union nut to mount the cables in the cable fitting. For the tightening torque, refer to the cable
specifications.