BRUEL & KJAER PULSE 3560-B, Technical Documentation Manual, Page: 36 / 162

PULSE Multi-analyzer System Type 3560-B/C/D/E – Installation and IDAe Hardware 28
Fig.2.20
Connection attempt failed
If this is a new configuration or reconfiguration and you are in the process of changing the
front-end IP address, click
Next . If you are connecting to an established configuration but
the connection has failed, check your cable connections and click Retry .
Clicking Next displays the Setting Front-end IP address page (Fig.2.21).
Fig.2.21
Setting up frame IP with
the RS
−
232 port and a
PC COM port
In order to physically update the IP address of the Type 3560-B/C/D/E frame, you must
connect the supplied cable AO-1451 between the RS
−
232 port on the frame’s LAN Inter-
face Module (the controller module) and a COM port on your PC. Fig.2.21 shows the