© Brüel & Kjær Vibro
● C107758.002 / V04
Page 7 of 42
Technical alterations reserved!
Brüel & Kjær Vibro
│
Installation instruction VCM-3 / VCM-3 Ex
Safe use of VCM-3 / VCM-3 Ex
EN
UNRESTRICTED DOCUMENT
2.3
General warnings
2.3.1
Staff requirements
Transport, storage, installation, assembly, connection, commissioning, maintenance and service must
be undertaken exclusively by qualified technicians. The following must strictly be observed:
•
The instructions in this document
•
The instructions for product and safety and the pictograms on the product
•
Any product specific provisions and requirements
•
All national and regional regulations for safety and accident prevention must be followed.
WARNING!
In the event of impermissible opening of the product or removal of components, improper
use, or incorrect installation or operation there is a risk of personal injury or damage to
property.
2.4
Grounding information
The casing of the VCM-3 can be grounded through the Protective Earth Screw at the left side of the
cabinet.
