Page 6 of 42
© Brüel & Kjær Vibro
● C107758.002 / V04
Technical alterations reserved!
EN
UNRESTRICTED DOCUMENT
VCM-3 Ex variant is an EX-certified product and may be used in a hazardous area with flammable
gases with apparatus groups IIC.
The equipment is certified for use in ambient temperatures in the range of -30° C to +60° C and must
not be used outside this range.
ATEX
Applied standards are EN/IEC 60079-0 and EN 60079-7
Type Examination Certificate Number: UL 20 ATEX 2467 X
ATEX Marking from VCM-3 Ex
II 3G Ex ec T4 Gc T
amb
-30 ° C to +60° C
IECEx
Applied standards are EN/IEC 60079-0 and IEC 60079-7
Certificate Number: IECEx UL 20.0034X
IECEx Marking from VCM-3 Ex
Ex ec T4 Gc T
amb
-30 ° C to +60° C
UL hazloc
Class I, Division 2, Groups A-D
Class I, Zone 2, Group IIC
T4 T
amb
-30 ° C to +60° C
File: E470442
WARNING!
Explosion Hazard - Do not disconnect equipment unless power has been switched off or
the area is known to be non-hazardous.
Device is open-type and is meant to be installed in a suitably rated enclosure providing
the appropriate type of protection such that the equipment is only accessible with the use
of a tool.
2.2.1
General Information
Never operate damaged products. Upon delivery inspect the packaging for damage and compare the
delivered item with the ordered items. If VCM-3 is used in a way that is not described in the present
instruction, this may result in impairment of functions and of protection.
NOTE!
Observe the instructions in this document for safe installation, commissioning and
disposal of VCM-3.
Also consider the datasheet for
VCM-3
– C107757.002 EN VCM-3 Product
specifications and ordering information.
