BRP Ski-Doo MX Z X 440 2007, Operator'S Manual

Page: 16 / 30

High Speed Compression Adjuster
The High speed adjuster modifies the damping force for high sus-
pension velocities — more than 0.5 m/s (1.6 ft/s). It tunes the ve-
hicle for hoops or bumps that create high speed movement in the
suspension. This adjuster has 3 turns of adjustment. Use a 17 mm
wrench to adjust it. Turning it clockwise increases shock damping
action (stiffer) for these high compression speeds.
A33F0DA
1 2
TYPICAL
1. Low speed compression adjuster (flat screwdriver)
2. High speed compression adjuster (17 mm wrench)
Center and Front Springs
CAUTION: Make sure that center spring and both front springs
are still preloaded when front of vehicle is off the ground. Max-
imum spring preload is 25 mm (1 in). Otherwise, spring will be
coil bound when fully compressed.
14
_________________________