BRP Ski-Doo MX Z X 440 2007, Operator'S Manual

Page: 10 / 30

1
A33E0SA
2
1. Button depressed: Pre-heat timing curve
2. Button released: 108 (R + M)/2+ octane timing curve for North America
version (98 RON + Octane timing curve for outside North America)
After starting the engine, push and hold the pre-heat switch button
in order to pre-heat the tuned pipe. Release pre-heat switch button
once the tuned is pre-heated.
44) Primer Button
Pull and push button. It is not necessary when engine is warm.
To prime, activate button until a pumping resistance is felt. From
this point, pump 2 or 3 times to inject fuel in intake manifold. After
priming, ensure that primer button is pushed back.
NOTE: In very cold temperature, it is recommended to rotate primer
button 3 - 4 turns prior to pull it. This will eliminate the possibility of
sticking.
8
__________________________