BRP Sea-Doo GTX 170 2022, Operator'S Manual, Page: 112 / 204

110
– The speed limiter indicator will go
off.
N NO OT TE E::
If the throttle lever is not fully released
when the button is pressed to deacti-
vate the speed limiter mode, the
speed control MODE indicator will re-
main on. The speed limiting function
will stay active until the throttle is fully
released, then the speed control
MODE indicator will go out.
S Sllo ow w S Sp pe ee ed d M Mo od de e
The Intelligent Throttle Control also al-
lows for a Slow Speed Mode where
the driver can adjust and set idle
speed. This is useful when operating
in slow speed zones where the driver
must be especially attentive to possi-
ble obstacle avoidance.
If you accelerate above approximately
15 km/h (9 MPH) , Slow Speed Mode
will be deactivated and the engine will
return to idle RPM when the throttle is
released.
Should a situation arise where the op-
erator must stop or accelerate quickly
away from a hazardous situation, pull-
ing in the iBR lever, or pulling in on the
throttle lever will deactivate slow
speed mode and normal control of the
watercraft will be returned to the
operator.
P Prre erre eq qu uiissiitte e ffo orr S Sllo ow w S Sp pe ee ed d M Mo od de e
A Accttiivva attiio on n
Slow Speed MODE can be activated
when the watercraft is going at less
then 15 km/h (9 MPH).
N NO OT TE E::
Slow speed mode is not available if
speed limiter mode is engaged.
A Accttiivva attiin ng g S Sllo ow w S Sp pe ee ed d M Mo od de e
To activate slow speed mode of
operation:
1. Release the throttle lever to idle
RPM.
2. Press the SPEED CONTROL but-
ton on the left keypad.
1. Speed Control button
The Speed Control indicator will come
on in the multifunction display to indi-
cate activation.
T TY YP PIIC CA AL L
A message will scroll in the multifunc-
tion display to specify that you are
now in slow speed mode.
The default slow speed setting of 5 will
show in the numerical display.
OPERATING MODES