SETUP
NOTE:
B.U.D.S. can be used to program additional
keys (included keys are ready to use).
Use B.U.D.S. to
– Enter Customer's Name
– Reset Trip Hours and Trip Distances
– Reset Last Service
– Set Speedometer Units
– Set Cluster Language (base model only)
– Check fault codes (if any).
Connecting PC to Vehicle
1. Remove RH electrical service cover from vehi-
cle.
2. Connect the PC to vehicle. Refer to the latest
edition of
CAN-AM ROADSTER B.U.D.S. SOFT-
WARE AND COMMUNICATION TOOLS
for the
proper procedure.
3. Press READ DATA button from the tool bar to
initiate communication with the vehicle.
vmr2006-012-100_aen
Entering Customer's Name
1. Click on the VEHICLE tab to open the vehicle
information page.
rbl2013-002-023
TYPICAL
2. Type the name of the customer.
vbl2006-007-002
TYPICAL
3. Click on WRITE DATA to save the information
in the vehicle ECM.
NOTE:
After you are finished typing the name,
B.U.D.S. automatically updates the Delivery Date
on the screen.
Resetting Trip Hours and Trip Distances
1. Ensure that the VEHICLE tab is selected.
2. Click on the RESET TRIP buttons to reset the
information.
rbl2013-002-024
TYPICAL
NOTE:
It can also be done directly on the info-cen-
ter, using the selector button.
Resetting Last Service
1. Click on the RESET SERVICE button to reset
the informations.
PREDELIVERY
2014-2
33 / 39
