PARTS TO BE INSTALLED
rbl2011-002-011
TYPICAL
4. Install 4 M8x 20 hexagonal flange screws
loosely to hold the fender in its position.
NOTE:
Be sure to install the fender light harness
and ABS harness brackets as illustrated. Do not
torque screws at this time.
NOTE:
Left side fender installation illustrated,
right side similar.
rbl2014-004-049_a
1. Fender light harness bracket, top screw, forward fender support
2. ABS harness bracket, lower screw, rear fender support
3. ABS sensor
5. Connect fender light connector.
NOTE:
Make sure harnesses are properly secured
through cable grommet in upper suspension arm.
rbl2013-002-006_a
1. Fender light connector
rbl2013-002-009_a
1. Cable grommet
2. Harness bracket
6. Tighten fender support screws to specification.
rbl2013-002-008_b
1. M8 x 20 hexagonal flange screws
SPECIFIED TORQUE
Fender support retaining
screws
24 N•m (18 lbf•ft)
PREDELIVERY
2014-2
19 / 39
