PARTS TO BE INSTALLED
rbl2014-002-003_a
ALL EXCEPT BRAZIL MODELS
1. Upper side panel
2. Panel screw
3. Panel nut
4. Locking tie
2.2 Remove screws at rear of panel.
rbl2013-002-019_a
TYPICAL - ALL MODELS
1. Screws to remove
2.3 Install the previously removed panel nut on
lateral bracket.
rbl2013-002-020_a
TYPICAL
1. Panel nut
3. Assisted by another person, remove and dis-
card bolts holding the bottom and the top sec-
tions of sub-crate.
rbl2014-002-002_a
TYPICAL
1. Lower retaining bolts
2. Upper retaining bolts
NOTE:
Be careful not to lose the caged nuts lo-
cated in the bottom fixation holes of the front
cargo module.
4. Open front storage compartment cover.
5. Remove 3 plastic rivets securing LH and RH
front panels.
rbl2008-003-100_d
TYPICAL - FRONT PANEL PLASTIC RIVET LOCATIONS
6. Cut locking ties securing horn and AAPTS har-
ness to frame.
PREDELIVERY
2014-2
11 / 39
