PARTS TO BE INSTALLED
rbl2013-002-011_a
1. Locking tie
rbl2013-002-022_a
1. Locking tie
NOTE:
For
Australian models
route the back-up
light harness making a loop in the locking ties as
shown.
rbl2013-003-021_a
1. Locking ties
2. Locking ties in a loop
6. Put fender in position and install two M6 x 20
screws on each side.
NOTE:
Do not torque screws.
rbl2013-002-014_a
TYPICAL
1. Fender
2. Screws
7. Install two screws and nuts on each side of
fender reinforcement plate.
NOTE:
Do not torque screws and nuts.
rbl2013-002-015_a
TYPICAL
1. Fender reinforcement plate
2. Screws and nuts
8. Torque screws and nuts according to the follow-
ing tightening sequence:
PREDELIVERY
2014-2
21 / 39
