BRP can-am COMMANDER 1000 2017, Operator'S Manual

Page: 86 / 155

SPECIAL PROCEDURES
What to do if Water is
Suspected to be in the CVT
If water is present in the CVT, the en-
gine will accelerate but the vehicle will
remain still.
NOTICE
Stop the engine and drain
the water to avoid damage to the
CVT.
vmo2012-012-055_a
1. CVT drain
CVT drain is accessible by removing
the skid plate under the LH side of the
vehicle.
tmo2012-001-202_a
SKID PLATE REMOVED
1. Access hole under skid plate
2. CVT drain location
See an authorized Can-Am dealer to
have the CVT inspected and cleaned.
What to do if Battery is
Drained out
The vehicle can be jump started by us-
ing the red (+) cable to the battery pos-
itive pole and the black (-) cable to the
vehicle chassis.
NOTICE
Do not connect any elec-
trical source to the steering column.
What to do if Vehicle Rolled
Over
Abrupt maneuvers, sharp turns, side
hilling or accident may cause vehicle to
rollover.
Should the vehicle be rolled over, it will
be necessary to have it transported to
an authorized Can-Am dealer as soon
as possible.
NEVER START THE EN-
GINE!
What to do if Vehicle is
Submerged
Should the vehicle become immersed,
it will be necessary to have it trans-
ported to an authorized Can-Am dealer
as soon as possible.
NOTICE
Never start the engine as
immersion of the vehicle can cause
serious damage to the engine if the
correct restart procedure is not fol-
lowed.
84
______________