BRP can-am COMMANDER 1000 2017, Operator'S Manual

Page: 95 / 155

MAINTENANCE PROCEDURES
tbs2011-009-002_b
Engine Air Filter Cleaning
Clean engine air filter by tapping out
heavy dust from paper element, this
will allow dirt and dust to get out of the
paper filter.
NOTICE
It is not recommended to
blow compressed air on the paper
element; this could damage the pa-
per fibers and reduce its filtration
ability when used in dusty environ-
ments. If engine air filter is too dirty
and cannot be cleaned following the
recommended procedure, it should
be replaced.
Engine Air Filter Installation
1. Install engine air filter.
2. Verify that engine air filter rubber
seal has no gap with the engine air
filter housing.
NOTICE
If the fit is not good, dust
may bypass the engine air filter.
tbs2011-009-001
3. Verify that the cover fits well on the
engine air filter housing before clos-
ing clamps.
tbs2011-009-003
Front Grill Kit
1. Remove debris from front grill kit.
_______________
93