BRP can-am COMMANDER 1000 2017, Operator'S Manual

Page: 98 / 155

MAINTENANCE PROCEDURES
Recommended Engine Oil
RECOMMENDED ENGINE OIL
SEASON TYPE
Summer
XPS 4-STROKE
SYNTH. BLEND OIL
(P/N 293 600 121)
All seasons
XPS 4-STROKE
SYNTHETIC OIL
(P/N 293 600 112)
NOTE: The XPS oil is specially formu-
lated to meet the lubrication require-
ments of this engine. BRP strongly
recommends the use of its XPS
4-stroke oil.
NOTICE
Damages caused by the
use of oil not suitable for this engine
will not be covered by the BRP lim-
ited warranty.
If XPS engine oil is not available, use
a 4-stroke SAE 5W 40 engine oil that
meets or exceeds the requirements
for API service classification SJ, SL,
SM or SN. Always check the API ser-
vice label certification on the oil con-
tainer it must contain at least one of
the above standards.
Engine Oil Change
Place vehicle on a level surface.
Oil change and oil filter replacement
should be done with a warm engine.
CAUTION The engine oil can
be very hot. Wait until engine oil is
warm.
Place a drain pan under the engine
drain plug area.
Clean the drain plug area.
Unscrew drain plug and discard the
gasket ring.
tmr2011-010-003_a
1. Gasket ring
2. Drain plug
Remove dipstick.
Allow oil to drain completely from the
crankcase.
Clean the magnetic drain plug from
metal shavings and residue. Presence
of debris gives an indication of internal
engine damage.
Install a NEW gasket ring on the drain
plug.
NOTICE
Never use the gasket ring
a second time. Always replace by a
new one.
Install and tighten drain plug to the rec-
ommended torque.
TORQUE
Drain plug
30 N•m ± 2 N•m
(22 lbf•ft ± 1 lbf•ft)
Replace oil filter. Refer to
OIL FILTER
in this subsection.
Refill engine with recommended en-
gine oil.
ENGINE OIL CAPACITY
2 L (2.1 qt (U.S. liq.))
Oil Filter
Oil Filter Access
Remove the passenger seat.
Remove the right hand side engine
console panel.
96
______________