10
Rear panel – keyboard
B1:
“MODE/SET” button
B2:
“HIST/UP” button
B3:
Installation bracket
B4:
“DOWN” button
B5:
“RAIN/ALERT” button
B6:
Battery chamber
B7:
Support
Rain gauge (wireless sensor)
C1:
Funnel clamps
C2:
Measurement trough
C3:
Spirit level
C4:
Sensor base clamps
C5:
Battery chamber
C6:
Openings of fixing screws
Place 2 x AAA batteries (not included) in the battery chamber of the weather station. The station will start operating
automatically.
Remove the funnel from the rain gauge (external sensor) (pushing at the same time both the C1 clamps to the inside)
and the gauge (pushing at the same time both the C4 clamps to the inside). Next, place 2 x AA 1.5 V batteries (not
included) in the battery chamber. Place the sensor on a flat surface, adjusting its position using the C3 spirit level (the
air bubble she be located within the black circle, as close to its centre as possible).
