12
secondary precipitation is recorded for 30 minutes, the values displayed will be reset.
−
“1 HOUR” mode - total amount of precipitation during the last hour (calculated from the time currently displayed).
−
“24 HOURS” mode - total amount of precipitation during the last 24 hours (calculated from the time currently
displayed).
−
“TODAY” mode - total amount of precipitation during the last day (from 0:00 to 23:59).
−
“7 DAYS” mode - total amount of precipitation during the last 7 days.
−
“MONTH” mode - total amount of precipitation during the last month. Once the next month starts, the values are
reset.
−
“YEAR” mode - total amount of precipitation during the last year (12 months).
−
“TOTAL” mode - total amount of precipitation measured from the moment of starting the device.
In order to display the history of measurements from the last 12 months (with breakdown into individual months), press
the “HIST/UP” button.
In order to reset the device memory, press and hold at the same time the “HIST/UP” and “RAIN/ALERT” buttons.
Precipitation amount chart - graduated cylinder:
The cylinder chart shows the
amount of precipitation in real
time, irrespective of the active
display mode. The cylinder is
divided into 10 segments. Every
segment symbolises 10% of the
current cylinder capacity (value
A11, mm or in, depending on
previously selected settings).
As of the moment of exceeding
100%,
the
total
cylinder
capacity is increased and the
percentage values (segments)
will be updated automatically.
Precipitation amount alert
In order to change the precipitation amount alert settings, press and hold the “RAIN/ALERT” button. Use the “UP” and
“DOWN” buttons to set the appropriate value. Then use the “RAIN/ALARM” button to move to another function settings.
Function setting order:
1. Alert activation - On/Off
2. Precipitation amount at which the alert is activated
The current function status is shown by the icon in the form of a triangle with an exclamation mark A12 appearing on
the display.
Additional information:
If the value of temperature/humidity measured is outside of the device’s range of measurement, the display will show
one of the following designations:
−
HH.H
– values above the measurement range
−
LL.L
– values below the measurement range
In the event of the weather station / external sensor running out of battery power, the display will show the icon
next to the Indoor / Outdoor text.
Caution!
Every household uses electrical and electronic appliances, and thus is a potential source of waste, hazardous to humans
and the environment, due to the presence of hazardous substances, mixtures, and components in the equipment. On
the other hand, discarded equipment is a valuable resource from which raw materials like copper, tin, glass, iron, and
others can be recovered.
The symbol of the crossed out wheelie bin placed on the equipment, packaging, or documentation attached
to it, means that the product must not be disposed of together with other waste. The labelling simultaneously
means that the equipment was introduced to the market after the date of August 13th, 2005.
It is the responsibility of the user to transfer the used equipment to a designated collection point for proper
recycling. Information on the available collection system for elec
trical equipment can be found in the shop’s information
