BROWAN COMMUNICATIONS
Page
44
5GHz (11a) or 5GHz(Turbo Mode 11a)
– the radio will work on 5GHz 11A mode. 5GHz(Turbo
Mode 11a) can supply 108 raw data rate.
Only under Bridge mode, Turbo Mode 11a can be set.
Total Output Power (EIRP)
–the BW2250 transmission output power (EIRP) in dBm.
Default is 16dBm&WORLD.
Total Output Power (EIRP) = Antenna Gain + RF card output power
Antenna:
Type of Antenna, two items for choice. BA5070 is the approved antenna supplied by
Browan. Choose BA5070 antenna is used for meeting the limitation of regulatory domain. If you want
to gain a larger output power for the real usage, it is strongest recommended to select
custom
.
BA5070 antenna is the accessory of BW2250 Product.
Refer to the Appendix D for BA5070 Antenna Spec:
If you want to gain a larger output power for the real usage, it is strongly
recommended to select
custom
.
RTS Threshold
– when set, this setting specifies the maximum packet size beyond which RTS/CTS
mechanism is be invokes. The value range of this is [0 …2347]. Default is 2347, which means that
RTS is disabled.
Enable DCA
– Enable or Disable DCA service. DCA can help to choose the best working channel
automatically. And static channel selection will be forbidden if DCA is enabled.
DCA (Dynamic Channel Allocation) solution automatically selects the optimal operational frequency
channel when power up and periodically monitors the environment and adjusts for the best
operational frequency channel.
DCA service is available only under 2.4GHz band.
DCA threshold
– specify the value (in minutes) of DCA threshold. This threshold is been used to
judge if there is no wireless users connected during this time. And if yes, BW2250 will monitor the
environment and adjust channel for the best operational one.
If wireless network environment is stable which means auto channel selection
needn’t do frequently, set a big value for DCA threshold to gain a stable wireless
users’ connection.
If wireless network environment changes continually, frequent auto channel
selection is needed. So set a relative small value for DCA threshold to let channel
change based on wireless environment.
Wireless users’ will be kicked off when DCA is processing (site survey and new
operational frequency channel takes effect).
Summary of Contents for BW2250
Page 69: ...BROWAN COMMUNICATIONS Page 68 ...
