background image

BROWAN COMMUNICATIONS

  

Page 

 

Copyright 

©  2002-2006 BROWAN COMMUNICATIONS. 

This MARKET REQUIREMENT DOCUMENT is copyrighted with all rights reserved. No part of this 
publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated 
into any language in any form by any means without the written permission of BROWAN. 

 

Notice 

BROWAN reserves the right to change specifications without prior notice. 

While the information in this document has been compiled with great care, it may not be deemed an 
assurance of product characteristics. BROWAN shall be liable only to the degree specified in the 
terms of sale and delivery. 

The reproduction and distribution of the documentation and software supplied with this product and 
the use of its contents is subject to written authorization from BROWAN. 

 

Trademarks 

The product described in this book is a licensed product of BROWAN. 

Microsoft, Windows 95, Windows 98, Windows Millennium, Windows NT, Windows 2000, Windows 
XP, and MS-DOS are registered trademarks of the Microsoft Corporation. 

Novell is a registered trademark of Novell, Inc. 

MacOS is a registered trademark of Apple Computer, Inc. 

Java is a trademark of Sun Microsystems, Inc. 

Wi-Fi is a registered trademark of Wi-Fi Alliance. 

All other brand and product names are trademarks or registered trademarks of their respective 
holders. 

Summary of Contents for BW2250












































































Reviews: