BROTJE BK 250/2, Assembly Instructions Manual

Page: 12 / 76

1 Safety
1.1 General safety instructions
Caution
There is a risk of significant material damage when installing the
accessories. Accessories must therefore only be installed by
trained contractors and commissioned by a competent person
appointed by the system installer. Accessories used must
correspond to the technical regulations and be approved by the
manufacturer in combination with these accessories.
Caution
Only genuine spare parts may be used.
Danger
Risk of death due to modifications to the boiler!
Unauthorised conversions and modifications to the boiler are not
permitted, as these can put people at risk and cause damage to
the boiler. Failure to comply with these instructions renders the
approval for the boiler void.
1.2 Recommendations
The flue cascade systems BK 250/1 are designed for routing flue gas from
two gas condensing boilers from the series Eurocondense 125 kW-170
kW with the same output.
The flue cascade systems BK 250/2 are designed for routing flue gas from
two gas condensing boilers from the series Eurocondense 215 kW-300
kW with the same output.
See
The
assembly instruction
of the gas condensing boiler used must
be followed.
1.3 Specific safety instructions
Danger
Risk of injury from falling heavy loads! Persons taking part in
transportation must wear protective gloves and safety shoes!
en
1 Safety
12 358643 - 02 - 27022020