Z-8550A, 8560A
6. USING THE OPERATION PANEL (BASIC OPERATIONS)
23
(8) RESET
key
This key is used to return the lower thread counter to its initial value and to cancel warning
conditions.
•
If this key is pressed when the lower thread counter value is “0” or less, the value will
return to the initial value.
•
If this key is pressed for 2 seconds or more while the lower thread counter value is “1” or
more, the value will return to the initial value.
(9) Half stitch key
When the sewing machine is stopped, the needle bar can be moved up and down by
pressing this key.
(10) Plain zigzag key
When this key is pressed so that the indicator illuminates, a plain zigzag pattern is
selected.
•
When a plain zigzag pattern has been selected, the indicator illuminates.
(11) 3-step zigzag key
When this key is pressed so that the indicator illuminates, a 3-step zigzag pattern is
selected.
•
When a 3-step zigzag pattern has been selected, the indicator illuminates.
(12) Scallop
key
When this key is pressed so that the indicator illuminates, a scallop pattern is selected.
•
Illumination switches between the left and right indicators each time this key is pressed.
•
When a scallop pattern has been selected, one of the indicators (left or right) illuminates.
(13) Straight stitch key
When this key is pressed so that the indicator illuminates, a straight stitch pattern is
selected.
•
When a straight stitch pattern has been selected, the indicator illuminates.
(14) 2-step zigzag key
When this key is pressed so that the indicator illuminates, a 2-step zigzag pattern is
selected.
•
When a 2-step zigzag pattern has been selected, the indicator illuminates.
(15) Blind stitch key
When this key is pressed so that the indicator illuminates, a blind stitch pattern is selected.
•
Illumination switches between the left and right indicators each time this key is pressed.
•
When a blind stitch pattern has been selected, one of the indicators (left or right)
illuminates.
(16) CF key
（
for option
）
•
This key is disabled when there is no custom pattern available.
•
If a custom pattern is available, the indicator will illuminate when this key is pressed and
the custom pattern will be selected.
•
When a custom pattern has been selected, the indicator illuminates.
(17) Setting
keys
These keys are used to make settings for zigzag width, zigzag base line position and
scallop stitching.
[Z-40 only]: In addition, they are also used to make the settings for the number of backtack
stitches A, B, C and D and the number of fixed stitches E and F.
•
When the key is pressed, the value increases.
•
When the key is pressed, the value decreases.
3398M
2156M
3399M
3400M
3401M
3402M
3403M
3404M
3405M
2137M 2138M 2139M
