Brother ULT-2003D Operation Manual Download

Page: 232 / 321

Embroidery

5-57

1 —

2 —

3 —

4 —

5 —

6 —

7 —

8 —

9 —

CONTENTS

Index

ABC

EMBROIDERY APPLICATIONS

Aligning the Left Side of a Pattern and Sewing

1. Mark the embroidery start position on the fabric, as

shown.

2. Press

so it appears as

The needle position moves to the bottom left corner of
the pattern (the embroidery frame moves so that the
needle is positioned correctly).

3. Use

to align the needle and the mark on the

fabric, and begin embroidering the pattern.

CAUTION

Do not lower the needle while the embroidery
frame is moving. Otherwise, injury may result.

4. View of the finished pattern.

Summary of Contents for ULT-2003D


































































































































































































































































































































Search results

Summary of Contents for ULT-2003D

Reviews:

Related manuals for ULT-2003D

Brands by name

Popular brands

Brother ULT-2003D, Operation Manual

Search results

Summary of Contents for ULT-2003D

Reviews:

Related manuals for ULT-2003D

Brands by name

Popular brands