Brother ULT-2003D Operation Manual Download Page 136

Page: 136 / 321

Sewing Utility Stitches

3-63

1 —

2 —

3 —

4 —

5 —

6 —

7 —

8 —

9 —

CONTENTS

Index

■

Attaching a Shank to the Button

1. Pull the shank lever toward you before sewing.

Shank lever

2. Pull the two ends of the upper thread between the but-

ton and the fabric, wind them around the shank, and
then tie them firmly together.

3. Tie the ends of the bobbin thread from the beginning

and end of sewing together on the wrong side of the
fabric.

Eyelet

Use this stitch pattern for making belt holes and other similar applications.

1. Select

Summary of Contents for ULT-2003D


































































































































































































































































































































Search results

Summary of Contents for ULT-2003D

Reviews:

Related manuals for ULT-2003D

Brands by name

Popular brands

Brother ULT-2003D, Operation Manual

Search results

Summary of Contents for ULT-2003D

Reviews:

Related manuals for ULT-2003D

Brands by name

Popular brands