BROTHER HL-L2300 SERIES TN630/660 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
REMANUFACTURING THE BROTHER HL-L2300
SERIES TN630/660 TONER CARTRIDGE
By Mike Josiah and the Technical Staff at UniNet
© 2015 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
Released in July 2014, the Brother HL-L2300 printer engine is based on a new 27-32ppm, 1200 DPI laser engine. These machines
have a first page out in less than 8.5 seconds, and come standard with 8MB or 32MB of memory depending on the machine.
The HL-L2300 series also have duplexing built in. Our HL-2360 machine came with a starter cartridge, which is rated for 700
pages. The starter cartridge does not come with any reset gears.
There are two different toner cartridges available for these machines: the TN630 is rated for 1,200 pages, and the TN660 is rated
for 2,600 pages. The drum unit, which will be covered in separate instructions, is rated for 12,000 pages. There are different part
numbers for these cartridges depending on your region. They are as follows...
CARTRIDGE REGION
STANDARD
HIGH YIELD
DRUM
North/South America
TN630
TN660
DR630
Europe
TN2310
TN2320
DR2300
Asia/Middle East/Africa
TN2360
TN2380
DR2355
Oceania
TN2330
TN2350
DR2325
Shown above is the toner cartridge with the developer roller cover.
CURRENT MACHINES RELEASED SO FAR FOR THIS SERIES
HL-L2300D
HL-L2320D
HL-L2340DW
HL-L2360DW
HL-L2365DW
HL-L2380DW
DCP-L2520DW
DCP-L2540DW
MFC-L2700DW
MFC-L2720DW
MFC-L2740DW
