17. Install the E-ring on the developer roller shaft.
18. The cartridge we are remanufacturing is a starter cartridge
and did not come with a retaining plate, reset gear, or spring.
These items need to be installed for the printer to accept a
starter cartridge as new.
BROTHER HL-L2300 SERIES TN630/660 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2015 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
19. Install the three gears next to the developer roller.
20. Install the small gear end cap.
