Brother RJ-2035B User Manual Download Page 11

Page: 11 / 62

LED Indicator

Status

Indication

Printer Status

Off

The printer is ready.

Green (blinking)

The printer is paused.

Green (blinking
every two seconds)

The printer has entered sleep mode
after more than two minutes of
inactivity. To change the sleep mode
time, see

FBPL Command Reference

Manual

on the Brother support

website.

Red (solid)

The Media Compartment Cover is
open.

Red (blinking)

A printer error has occurred.

Orange (blinking)

The printer's battery is charging.

Battery Status

Green (blinking)

The printer's battery is charging.

Green (solid)

The printer's battery is fully charged.

Wi-Fi/Bluetooth Status

Blue (blinking)

The printer is communicating with a
Bluetooth/Wi-Fi device.

Blue (solid)

The printer is connected to a
Bluetooth/Wi-Fi device.

Summary of Contents for RJ-2035B































































Search results

Summary of Contents for RJ-2035B

Reviews:

Related manuals for RJ-2035B

Brands by name

Popular brands

Brother RJ-2035B, User Manual

Search results

Summary of Contents for RJ-2035B

Reviews:

Related manuals for RJ-2035B

Brands by name

Popular brands