P-touch Template Command Reference
- 48 -
7.
Control Command Details
^FC
FNC1 replacement setting
ASCII:
^
F C n
Decimal:
94 70 67 nd
Hexadecimal: 5E 46 43 nh
Parameters
0
≤
n
≤
1
Description
This command selects whether or not GS codes, which are included in bar code protocols such as
GS1-128 (UCC/EAN-128), are replaced with FNC1 codes.
n: FNC1 replacement setting
(ON: 1; OFF: 0 (default))
This command is a dynamic command.
Remarks
Invalid if n is a value other than 1 or 0
Example
To disable FNC1 replacement:
Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as follows.
^ F C 0
(5Eh 46h 43h 30h)