Brother PT-9500PC - P-Touch 9500pc B/W Thermal Transfer Printer, Service Manual, Page: 79 / 106

IV - 3
State of LED
Power
supply
(Green)
Error
(Red)
Status Remarks
AV beginning mark
detection error Only the ON/OFF key of power supply is enabled.
Cutter jam (before
printing, in printing,
power supply ON) Returns automatically to normal state when the
power supply is ON. If cannot return to normal
state and if error occurs while printing, only the
ON/OFF key is enabled.
LED
ON
Fast
blinking
Roller holder error The holder is released when the power supply is
ON. If it cannot be released and if an error occurs
while printing, only the ON/OFF key is enabled.
EEPROM error Only the power supply key is enabled. Error
occurrence is not reported to the PC.
LED
ON
Fast 2
blinking
Head rank error Only the power supply key is enabled. Error
occurrence is not reported to the PC.
(Note1)
Valid only when the print restart flag is set (print information command: ESCiC)
Green LED ON
Receiving standby mode:
The Green LED is ON if the status is ready for data receiving from the PC.
Green LED blinking
Receiving mode:
The LED flashes on and off when a print image generated trough the received commands
analysis exists on the buffer. After the completion of printing through the print command
receiving, the status returns to the receiving standby mode.
Red LED ON (Green LED blinking)
No medium when receiving:
The Red LED is ON if no medium is mounted when receiving. Receiving state is held.
A cover was opened when receiving:
The Red LED is ON if a cover is opened when receiving. Receiving state is held.
Red LED ON (Green LED ON)
No medium when waiting for receiving:
The Red LED is ON if no medium is mounted when waiting for receiving. The status is
transferred to a cover was opened when waiting for receiving.
(When an error is in the state of fast red LED blinking, the LED display is not changed.)
A cover was opened when waiting for receiving:
The red LED is ON if a cover was open in the standby mode, and the status is transferred to
receiving standby mode if a medium is mounted, and transferred to no medium when waiting
for receiving if no medium is mounted.
(When an error is in the state of fast red LED blinking, the LED display is not changed.)
Red LED ON (for 3 sec)
FEED key was pressed when an AV tape is mounted:
The red LED is ON for 3 seconds if the FEED key is pressed when an AV tape is mounted.
Returns automatically to the receiving standby mode after 3 seconds. (Returns automatically
to the receiving standby mode immediately also when receiving data exists.)