manualshive.com logo in svg

Brother PocketJet PJ-673, Manual

Share
Download
Brother PocketJet PJ-673 Manual Download Page 66

Chapter 6

62

The side margins are incorrect

Make sure that the correct margins have been set in PJ-673 
Utility and your application. Adjust the left margin as needed.

Make sure that the application, the printer, and the printer driver 
have been set to match the paper size of the paper that is 
loaded in the printer. If the computer program or printer driver 
has been set to a different width of paper, the image will not 
print in the proper horizontal position. Adjust the settings as 
needed.

The printed page does not contain the 
proper characters

Make sure that you have defined the proper character set (font) 
in the computer program. Change the character set if 
necessary.

Try changing the font used in the document.

This printer is not detected when 
establishing a USB connection.

This printer is not detected when 
establishing a wireless LAN connection.

When not detected, and using a USB connection:

Check that the WIRELESS LAN indicator is turned off.

If the WIRELESS LAN indicator is lit or blinking, the printer 
is in wireless LAN mode. Switch the printer to USB mode. 
For details on switching the communication mode, see 

Switching Between Wireless LAN Mode and USB Mode

 

on page 30.

When not detected, and using a Wireless LAN connection:

1 Check that the WIRELESS LAN indicator is lit or 

blinking.

If the WIRELESS LAN indicator is turned off, the printer 
is in USB mode. Switch the printer to wireless LAN 
mode. For details on switching the communication 
mode, see 

Switching Between Wireless LAN Mode and 

USB Mode

 on page 30.

2 Check the wireless LAN settings.

To print the printer settings, see 

Printing a Printer 

Report

 on page 59.

Consult with the network administrator, and then 
change the settings with PJ-673 Utility. For details on 
the utility, see 

Brother PJ-673 Utility

 on page 40.

Problem

Solution

Summary of Contents for PocketJet PJ-673












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands