Reference
57
5
Indicator Warnings
5
Problem
Solution
The POWER indicator does not light
The printer is receiving no power.
If you are using AC or DC power, make sure that the AC
adapter or DC cable is properly connected (see
on page 2) and make sure that the
AC or DC power outlet is turned on.
If you are using a rechargeable battery, make sure that the
rechargeable battery is firmly installed in the printer and is fully
charged.
If you are using DC power, check the fuse.
Error when beginning
charging/discharging (rechargeable Ni-
MH battery not installed)
The printer did not detect a rechargeable Ni-MH battery when
you tried to charge the battery.
Make sure that the rechargeable Ni-MH battery is installed
properly and that there are no broken wires at the battery or
connector. For more information, see
If the rechargeable Ni-MH battery is connected properly, the
battery may have overheated while charging. Allow the
rechargeable Ni-MH battery to cool before charging it again. If
this is a reoccurring problem, replace the rechargeable Ni-MH
battery.
Charging/discharging timeout error
(rechargeable Ni-MH battery)
The rechargeable Ni-MH battery is taking too long to charge
(normally the battery should be fully-charged within 120
minutes).
Replace the rechargeable Ni-MH battery.
Received data in buffer
Print data is saved in the buffer. Since printing will not begin
until all data has been received, accidentally stopping the
wireless LAN connection during transmission will save the
data, leaving the printer in a state where it cannot print. Turn off
the printer, and then turn it on again.
Summary of Contents for PocketJet PJ-673
Page 75: ......
