Brother P-Touch 2730 User Manual Download

Page: 17 / 84

GETTING

STARTED

LCD Display & Keyboard

LCD Display

1. Line number

Indicates line number within the label
layout.

2. Cursor

Characters are entered to the left of
the cursor. Indicates the current data
input position.

3. Return mark

Indicates the end of a line of text.

4. Caps mode

Indicates that the Caps mode is on.

5.~8. Style guidance

Indicates the current font (5),
character size (6), character style (7)
and frame (8) settings.

9. Tape length

Indicates the tape length for the text
entered.

10. Cursor selection

Use the and keys to select menu
items and the and keys to
change the settings.

LCD Display & Keyboard

7 8

Refer to “LCD Display” on page 21 for changing the contrast and display mode, and for turning
the back light on / off.

Summary of Contents for P-Touch 2730





















































































Search results

Summary of Contents for P-Touch 2730

Reviews:

Related manuals for P-Touch 2730

Brands by name

Popular brands

Brother P-Touch 2730, User Manual

Search results

Summary of Contents for P-Touch 2730

Reviews:

Related manuals for P-Touch 2730

Brands by name

Popular brands