manualshive.com logo in svg

Brother MFC-J220, Service Manual

The Brother MFC-J220 is a versatile all-in-one printer, copier, scanner, and fax machine. With its compact design and user-friendly features, it provides high-quality printing and scanning capabilities for both home and office use. You can easily find the free user manual to download for this product from manualshive.com. Experience hassle-free setup and maximize the functionality of your Brother MFC-J220 with this comprehensive manual.

Share
Download
background image

9-19

Confidential

9.4.7

Operational Check of Control Panel PCB 

(Function code 13)

„

Function

This function allows you to check the control panel PCB for normal operation.

„

Operating Procedure

(1) Press the 

1

 and 

3

 keys in this order in the initial stage of the maintenance mode. For models

without numerical keypad, enter 1 and 3 in this order using the  ,   and 

OK

 keys.

The "00    " will appear on the LCD.

(2) Press the keys in the order designated in the illustration shown below.

The LCD shows the corresponding number in decimal notation each time a key is pressed.
Check that the displayed number is correct by referring to the illustration below.

If a key is pressed out of order, the machine beeps (MFC only) and displays the "INVALID
OPERATE" on the LCD. To return to the status ready to accept key entry for operational
check, press the 

Stop/Exit

 key.

(3) After the last number key is pressed, the machine beeps (MFC only) and returns to the

initial stage of the maintenance mode.

To terminate this operation, press the 

Stop/Exit

 key. The machine returns to the initial

stage of the maintenance mode.

DCP375CW

DCP395CN

Key Entry Order

Summary of Contents for MFC-J220


























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MFC-J220

Brands by name

Popular brands

Load more brands