Brother MFC-9460CDN Basic User'S Manual Download Page 36

Page: 36 / 201

Chapter 3

IMPORTANT

• To avoid damaging your machine while

using the ADF, DO NOT pull on the
document while it is feeding.

• To scan non-standard documents, see

Using the scanner glass

on page 28.

Using the scanner glass

You can use the scanner glass to fax, copy or
scan pages of a book one page at a time.

Document Sizes Supported

How to load documents

Note

To use the scanner glass, the ADF must
be empty.

Lift the document cover.

Using the document guidelines on the
left and top, place the document

face down

in the upper left corner of the

scanner glass.

Close the document cover.

IMPORTANT

If the document is a book or is thick do not
slam the cover or press on it.

Length:

Up to 297.0 mm

Width:

Up to 215.9 mm

Weight: Up to 2.0 kg

Summary of Contents for MFC-9460CDN










































































































































































































Search results

Summary of Contents for MFC-9460CDN

Reviews:

Related manuals for MFC-9460CDN

Brands by name

Popular brands

Brother MFC-9460CDN, Basic User'S Manual

Search results

Summary of Contents for MFC-9460CDN

Reviews:

Related manuals for MFC-9460CDN

Brands by name

Popular brands