![Brother MFC-9460CDN Basic User'S Manual Download Page 122](http://html.mh-extra.com/html/brother/mfc-9460cdn/mfc-9460cdn_basic-users-manual_54189122.webp)
114
Condensation
One of the issues that can cause
this error is that condensation
may form inside the machine after
a room temperature change.
Leave switched ON. Fully open the front
cover. Wait 30 minutes, switch OFF and
close cover, then switch ON. If this does not
clear the error, call your Brother dealer.
Connection Fail
You tried to poll a fax machine
that is not in Polled Waiting mode.
Check the other fax machine’s polling setup.
Cooling Down
Wait for a while
The temperature of the drum unit
or toner cartridge is too hot. The
machine will pause its current
print job and go into cooling down
mode. During the cooling down
mode, you will hear the cooling
fan running while the LCD shows
Cooling Down
, and
Wait for
a while
.
Make sure that you can hear the fan in the
machine spinning and that the exhaust
outlet is not blocked by something.
If the fan is spinning, remove any obstacles
that surround the exhaust outlet, and then
leave the machine turned on but do not use
it for several minutes.
If the fan is not spinning, disconnect the
machine from the power for several minutes,
then reconnect it.
Cover is Open
The front cover is not completely
closed.
Close the front cover of the machine.
Cover is Open
The ADF cover is not completely
closed.
Close the ADF cover of the machine.
The ADF is open while loading a
document.
Close the ADF cover of the machine, then
press
Stop/Exit
.
Cover is Open
The fuser cover is not completely
closed or paper was jammed in
the back of the machine when
you turned on the power.
Close the fuser cover of the machine.
Make sure paper is not jammed inside
the back of the machine, and then close
the fuser cover and press
Mono Start
or
Colour Start
.
DIMM Error
The DIMM is not installed
correctly.
The DIMM is broken.
The DIMM does not meet the
required specifications.
Turn off the machine and remove the
DIMM.
Confirm the DIMM meets the required
specifications. (See
Memory board
in
Appendix B
of the
Advanced User's
Guide
.)
Re-install the DIMM correctly. Wait a few
seconds, and then turn it on again.
If this error message appears again,
replace the DIMM with a new one. (See
Installing extra memory
in
Appendix B
of
the
Advanced User's Guide
.)
Disconnected
The other person or other
person’s fax machine stopped the
call.
Try to send or receive again.
Document Jam
The document was not inserted
or fed correctly, or the document
scanned from the ADF was too
long.
See
Document is jammed in the top of the
on page 121 or
automatic document feeder (ADF)
Error Message
Cause
Action
Summary of Contents for MFC-9460CDN
Page 13: ...General information 5 1 ...