Brother MFC-9460CDN, Basic User'S Manual

Page: 125 / 201

Troubleshooting
117
B
Out of Memory
The machine’s memory is full. Fax sending or copy operation in
progress
Do one of the following:
 Press Mono Start or Colour Start to
send or copy the scanned pages.
 Press Stop/Exit and wait until the other
operations in progress finish, and then
try again.
 Clear the faxes from the memory.
Print the faxes that are stored in the
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid
storing more faxes in the memory. (See
Printing a fax from the memory in
Chapter 4 of the Advanced User's Guide
and Fax Storage in Chapter 4 of the
Advanced User's Guide .)
 Add optional memory. (See Memory
board in Appendix B of the Advanced
User's Guide .)
Print operation in process
Do one of the following:
 Reduce the print resolution. (See
Advanced tab in the Software User's
Guide .)
 Clear the faxes from the memory. (See
the above explanation.)
Print Unable XX
(XX = Error Code)
The machine has a mechanical
problem. Do one of the following:
 Turn the power switch off, wait a few
minutes, and then turn it on again. (See
Transferring your faxes or Fax Journal
report
on page 120.)

If the problem continues, call your
Brother dealer.
Protected Device
The protect switch of the USB
Flash memory drive is on. Turn off the protect switch of the USB Flash
memory drive.
Error Message Cause Action