Brother MFC-9140CDN User Manual Download Page 71

Page: 71 / 243

Printing data from a USB Flash memory drive or digital camera supporting mass storage (For MFC-9340CDW)

Press

Direct Print

NOTE

If your machine has been set to Secure
Function Lock

, you may not be able to

access Direct Print (see Advanced User's
Guide:

Switching Users

Swipe up or down, or press

choose the folder name and file name
you want.
If you have selected the folder name,
swipe up or down, or press

choose the file name you want.

NOTE

If you want to print an index of the files,
press

Index Print

on the

Touchscreen. Press

Colour Start

Mono Start

to print the data.

Do one of the following:



Press

Print Settings

. Go to

step



If you do not want to change the
current settings, go to step

Swipe up or down, or press

display the setting you want.

Press the option you want.

NOTE

• You can choose the following settings:

Paper Type

Paper Size

Multiple Page

Orientation

2-sided

Collate

Print Quality

PDF Option

• Depending on the file type, some of

these settings may not appear.

Do one of the following:



To change another setting, repeat
step



If you do not want to change other
settings, press

and go to step

Enter the number of copies you want
using the touchpanel.

Press

Colour Start

Mono Start

to print the data.

Press .

IMPORTANT

• To prevent damage to your machine, DO

NOT connect any device other than a
digital camera or USB Flash memory drive
to the USB direct interface.

• DO NOT remove the USB Flash memory

drive or digital camera from the USB direct
interface until the machine has finished
printing.

Summary of Contents for MFC-9140CDN




















































































































































































































































Search results

Summary of Contents for MFC-9140CDN

Reviews:

Brands by name

Popular brands

Brother MFC-9140CDN, User Manual

Search results

Summary of Contents for MFC-9140CDN

Reviews:

Brands by name

Popular brands