Brother MFC-9050, Owner'S Manual

Page: 91 / 202

78
C H A P T E R E I G H T
Speed Dialling
1
Pick up the handset.
2
When you hear a dial tone, press Speed Dial , then press the two-
digit Speed Dial number.
3
To hang up, replace the handset.
If you are sending a fax, press Start after pressing the Speed Dial
number. If you picked up the handset, press
Start
when the receiving fax
machine answers with fax tone.
Mute (Only for MFC-9550)
1
Press
Mute
to put a call on hold.
2
You can put down the handset without disconnecting the call.
3
Pick up the machine’s handset to release the call from hold. Picking
up an extension handset will not release the call from hold.
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
If your fax machine is connected to a PABX, you may need to insert an
additional number prefix (e.g. “9”) and a “pause” before each fax or
telephone number to gain access to the outside line. When you press
Redial/Pause
, a dash “-” will appear on the display. By storing a pause,
you can create a delay of 3.5 seconds.
On Hook Dialling
1
Dial the number by using the dial pad or One Touch Dial key, or
Speed Dial
and then two-digit Speed Dial number.
2
The number you are dialling, or the name you have stored for One
Touch or Speed Dial is displayed on the LCD.
3
Press
Start
.
4
Pick up the handset (and press Tel for MFC-9050) when you hear the
other end from the monitor speaker.
When you make a call by pressing Start after dialling, you can listen to
the other end of the line from the monitor speaker, but they can’t hear
you unless you pick up the handset (and press
Tel for MFC-9050).
If you accidentally press Tel before lifting the handset, the call will be
disconnected.
See
“Storing
Speed Dial
Numbers”
chap. 7