Brother MFC-9050, Owner'S Manual

Page: 200 / 202

187
Accessory List
Model Name Description
1 MB Memory Board ME-1000
2 MB Memory Board ME-2000
Laser Fax Toner TN-200
Laser Fax Drum DR-200
Using Remote Access Code
1
Dial your machine phone number from a
touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 Your machine signals the kinds of messages
received:
1 long beep — Fax message(s)
No beeps — no messages
4 After 2 short beeps, enter a command.
5
Press
9 0
to reset your machine when you
finish.
6 Hang up.
4
Change Answer Mode
Press 9 8
then for TAD, press 1 .
Fax/Tel (F/T), press 2 .
Fax, press 3 .
Exit Remote Operation
Press 9 0 .
Change Remote Access Code
1
Press
Menu
,
8
,
3
.
2
Enter the 3-digit number. The cannot be
used.
3
Press Set .
4 Press
Stop
to exit.
1
Using Remote Access Code
1 Dial your fax machine phone number
from a touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 The fax machine signals the kinds of
messages received:
1 long beep — Fax message(s)
2 long beeps — Voice message(s)
3 long beeps — Fax and Voice message(s)
No beeps — no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset the machine when you
finish.
6 Hang up.
1 5 6
Check Receiving Status
Press
9 7
then for Fax message, press
1
.
Voice message, press
2
.
1 long beep — received messages
3 short beeps — no messages
Change Answer Mode
Press
9 8
then for Message Manager (TAD mode),
press 1 .
Fax/Tel (F/T), press 2 .
Fax Only, press 3 .
Exit Remote Operation
Press
9 0
.
M
ESSAGE
M
ANAGER
R
EMOTE
C
ONTROL
A
CCESS
C
ARD
R
EMOTE
C
ONTROL
A
CCESS
C
ARD
(For MFC-9050)
(For MFC-9550)
➔
➔