Brother MFC-9050, Owner'S Manual

Page: 201 / 202

188
A C C E S S O R Y L I S T
2 3
Retrieve a Fax
Press 9 6
then to Print a Memory Status List press 1 ,
then enter the number of remote fax
machine, and then
# # . After the beep,
hang up and wait.
Retrieve all faxes press
2
, then enter the
number of remote fax machine, and
then
# #
. After the beep, hang up and
wait.
Erase all fax messages press
3
.
Check the Receiving Status
Press
9 7 1
.
1 long beep — Fax message(s)
3 short beeps — no messages
Enter the new number of the
remote fax machine where
you want your fax message
forwarded and then press
# # .
Enter Paging press
3
.
Program Fax Forward Number
press
4
. Press
9 6 1
after two
short beeps, then enter the
number of remote fax machine,
and then
# # to retrieve Memory
Status List.
Retrieve a Fax
Press 9 6
then to Print a Memory Status List press
1 , then enter the number of
remote fax machine, and then
# #
.
After the beep, hang up and wait.
Retrieve all faxes press
2
, then
enter the number of remote fax
machine, and then
# # . After the
beep, hang up and wait.
Erase all fax messages press 3 .
Changing Remote Access Code
1 Press
Menu
,
1
,
8
,
7
.
2
Enter a three-digit number from 000 to
998. The cannot be used.
3 Press
Set
.
4
Press Stop to exit.
Remote Commands
Listen to Voice Messages
Press
9 1
then to Repeat a message press
1
.
Skip to next message press 2 .
Stop playing the message press 9 .
Record a Memo
Press 9 2 .
Wait for the beep, then speak.
then to Stop recording — Press
9 .
4 2 3
Erase All Messages
Press 9 3 . If you hear three beeps, all
messages have not yet been heard, and the
messages will not be erased.
Play/Record Outgoing Message
Press 9 4
then to Play Message Center OGM press
1 1 .
Play F/T OGM press
1 2
.
Record new Message Center
OGM press
2 1
, then speak after
beep. Press
9
to stop.
Record new F/T OGM press
2 2
,
then speak after beep. Press 9 to
stop.
Change Paging/Fax Forwarding Setting
Press 9 5
then to Turn feature off press
1
.
Enter Fax Forwarding press 2 .
Remote Commands
Change Fax Forwarding Setting
Press 9 5
then to Turn feature off press 1 .
Enter Fax Forwarding press
2
.
Enter the new number of the remote
fax machine where you want your fax
message forwarded and then press
# #
.
Program Fax Forward Number press
4 . Press 9 6 1 after two short beeps,
then enter the number of remote fax
machine, and then
# # to retrieve
Memory Status List.
Turn Fax Storage on press 6 .
Turn Fax Storage off press
7
.