Brother MFC 7345N - Laser Multifunction Center, User Manual

Page: 46 / 192

32
5
How to fax
5
Entering fax mode
5
To enter fax mode press ( Fax ), and
the key will glow green.
Sending a fax from the ADF
5
Using the ADF to send your faxes is the
easiest way. To cancel a fax in progress
press
Stop/Exit .
a
Make sure you are in Fax mode .
b
Place your document face up in the
ADF.
c
Dial the fax number. (See How to dial
on page 52.)
d
Press Start .
The machine scans the pages into
memory and then sends the document.
Note
If the
Out of Memory
message
appears while scanning a document into
memory, press
Stop/Exit to cancel or
Start to send the scanned pages.
Sending a fax from the
scanner glass
5
You can use the scanner glass to fax the
pages of a book, or a single page at a time.
The documents can be up to Letter or A4
size. Press Stop/Exit to cancel a fax in
progress.
a
Make sure you are in Fax mode .
b
Place your document face down on the
scanner glass.
c
Dial the fax number. (See How to dial
on page 52.)
d
Press Start .
The machine starts scanning the first
page.
e
After the machine scans the page, the
LCD will prompt you to choose one of
the options below:
Next Page?
1.Yes 2.No(Send)
„ Press 1 to send another page.
Go to
f
.
„ Press 2 or Start to send the
document. Go to
g
.
f
Place the next page on the scanner
glass, press
OK . Repeat
e
and
f
for
each additional page.
Set Next Page
Then Press OK
g
Your machine will automatically send
the fax.
Note
When faxing multiple pages from the
scanner glass, real time transmission
should be set to
Off
. (See Real time
transmission on page 36.)
Sending a fax
5