manualshive.com logo in svg

Brother MFC 7345N - Laser Multifunction Center, User Manual

Share
Download
Brother MFC 7345N - Laser Multifunction Center User Manual Download Page 25

Loading paper and documents

11

2

Printing on thick paper, bond paper,  
labels and envelopes

2

When the back output tray is pulled down, the 
machine has a straight paper path from the 
manual feed slot through to the back of the 
machine. Use this paper feed and output 
method when you want to print on thick 
paper, labels or envelopes.

Note

• Remove each printed sheet or envelope 

immediately to prevent a paper jam.

• The machine automatically turns on the 

Manual Feed mode when you put paper in 
the manual feed slot.

 

a

Open the back cover (back output tray).

 

b

Open the manual feed slot cover.

 

c

Using both hands, slide the manual feed 
slot paper guides to the width of the 
paper that you are going to use.

 

d

Using both hands, put one sheet of 
paper or one envelope in the manual 
feed slot until the front edge of the paper 
or envelope touches the paper feed 
roller. When you feel the machine pull in 
the paper, let go.

 

 

Summary of Contents for MFC 7345N - Laser Multifunction Center

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands