manualshive.com logo in svg

Brother MFC 7345N - Laser Multifunction Center, User Manual

Share
Download
Brother MFC 7345N - Laser Multifunction Center User Manual Download Page 103

Safety and legal

89

A

International ENERGY STAR

®

 Compliance Statement

A

The purpose of the International ENERGY STAR

®

 Program is to promote the development and 

popularization of energy-efficient office equipment.

As an ENERGY STAR

®

 Partner, Brother Industries, Ltd. has determined that this product meets 

the ENERGY STAR

®

 guidelines for energy efficiency.

 

Laser safety

A

This equipment is certified as a Class 1 laser product as defined in IEC 60825-1+A2: 2001 under 
the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard 
according to the Radiation Control for Health and Safety Act of 1968. This means that the 
equipment does not produce hazardous laser radiation.

Since radiation emitted inside the equipment is completely confined within protective housings 
and external covers, the laser beam cannot escape from the machine during any phase of user 
operation.

FDA regulations

A

U.S. Food and Drug Administration (FDA) has implemented regulations for laser products 
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the 
United States. The following label on the back of the machine indicates compliance with the FDA 
regulations and must be attached to laser products marketed in the United States.

Manufactured:

BROTHER Industries (Vietnam) LTD.

Phuc Dien Industrial Zone Cam Phuc Commune, Cam giang Dist Hai Duong Province, Vietnam.

This product complies with FDA performance standards for laser products except for deviations pursuant 
to Laser Notice No. 50, dated June 24, 2007.

Summary of Contents for MFC 7345N - Laser Multifunction Center

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands