Brother MFC-7050C, Service Manual

Page: 111 / 153

V - 9
n
Detailed Description for the Firmware Switches
WSW05
(1st dial tone and busy tone detection
)
Selector
No.
Function Setting and Specifications
1
|
4
Not used.
5
6
Busy tone detection in auto-
matic sending mode
No. 5 6
0 0 : No detection
0 1 : Detection only after dialing
1 0 : No detection
1 1 : Detection before and after dialing
7
8
Not used.
l Selectors 5 and 6: Busy tone detection in automatic sending mode
These selectors determine whether or not the equipment automatically disconnects a line upon
detection of a busy tone in automatic sending mode.
Setting selector 6 to "0" ignores a busy tone so that the equipment does not disconnect the line.
Setting selectors 5 and 6 to "0" and "1," respectively, makes the equipment detect a busy tone only
after dialing and disconnect the line.
Setting both of selectors 5 and 6 to "1" makes the equipment detect a busy tone before and after
dialing and then disconnect the line.
WSW06
(Pause key setting)
Selector
No.
Function Setting and Specifications
1
|
3
Pause key setting
No. 1 2 3
0 0 0 : No pause
0 0 1 : 3.5 sec. WAIT
0 1 0 : 7 sec. WAIT
0 1 1 : 10.5 sec. WAIT
1 0 0 : 14 sec. WAIT
1 1 0 :
1 0 1 :
3.5 sec. WAIT
1 1 1 :
4
|
8
Not used.
NOTE: If the Pause key is pressed repeatedly, the equipment inserts the specified WAIT multiplied by
the number of depressions. It applies also in hook-up dialing.