manualshive.com logo in svg

Brother MFC 1870MC, Service Manual, Page: 164 / 217

Share
Download
Brother MFC 1870MC Service Manual Download Page 164

VI – 

15

• Compression springs beneath the recording head

At the recorder

[ 5 ]

Print-image related

If the received or sent image has any problem, first make a copy with the facsimile equip-
ment.

If the copied image is normal, the problem may be due to the remote terminal; if it is abnor-
mal, proceed to the following checks:

Trouble

Check:

(1) Completely blank

At the scanner

• Main PCB

At the recorder

• Main-head harness and head-power harness

• Compression springs beneath the recording head

• Recording head

• Main PCB

(2) White vertical streaks

At the scanner

• CIS unit

At the recorder

• Recording head

(3) All black

At the scanner

• CIS harness

• CIS unit

• Main PCB

At the recorder

• Main-head harness and head-power harness

• Recording head

• Main PCB

(4) Black vertical streaks

At the scanner

• CIS unit

At the recorder

• Recording head

(5) Light or dark

At the scanner

• CIS unit

• Main PCB

Summary of Contents for MFC 1870MC


























































































































































































































Reviews:

No comments