Brother MFC 1870MC, Service Manual, Page: 136 / 217

V –
41
Function Setting and Specifications
No. 1 2 3
0 0 0 : -47.0 dBm (A)
0 0 1 : -48.5 dBm (B)
0 1 0 : -50.0 dBm (C)
0 1 1 : -51.5 dBm (D)
1 0 0 : -53.0 dBm (E)
1 0 1 : -54.5 dBm (F)
1 1 0 : -56.0 dBm (G)
1 1 1 : OFF (H)
WSW29
(Function setting 7)
Selector
No.
1
|
3
4
|
6
No. 4 5 6
0 0 0 : -44.0 dBm (A)
0 0 1 : -45.5 dBm (B)
0 1 0 : -47.0 dBm (C)
0 1 1 : -48.5 dBm (D)
1 0 0 : -50.0 dBm (E)
1 0 1 : -51.5 dBm (F)
1 1 0 : -53.0 dBm (G)
1 1 1 : OFF (H)
Compression threshold level for
voice signals inputted via the
network in the built-in TAD
operation
Compression threshold level for
voice signals inputted via the
handset in the built-in TAD
operation
Automatic dialing by caller IDs
stored in the memory
8 Not used.
7 0: Yes 1: No
●
Selectors 1 through 6: Compression threshold level for signals inputted via the network/
handset in the built-in TAD operation (For those models equipped with
a built-in TAD)
If voice signals inputted via the network or handset are below the level specified by these
selectors, the TAD interprets those received voice signals as no signal, compressing the re-
cording time.
●
Selector 7: Automatic dialing by caller IDs stored in the memory (For those models equipped
with a built-in TAD)
This selector determines whether or not the automatic dialing function by caller IDs stored in
the memory (see the Note below) can be accessed.
If it is set to "0," caller IDs stored in the memory can be called up on the LCD by the user
function 6-7 and then pressing the Start key when the desired caller ID is displayed dials
the caller automatically.
(Note: The equipment can store a maximum of the latest 30 incoming caller IDs together
with the reception date and time in the memory.)