Brother Innov-is QC1000 Operation Manual Download Page 124

Page: 124 / 162

USING THE MEMORY FUNCTION

r/D
ec

tiv
e S

titc
he
s

123

Press .

* Press

to delete the stitch pattern.

→

The selected stitch pattern is retrieved and the
sewing screen appears.

Retrieving Stitch Patterns from the
Computer

Plug the USB cable connectors into the
corresponding USB ports on the computer
and on the machine (see page 121).

On the computer, open “My Computer”, and
then go to “Removable Disk”.

Move/copy the pattern data to “Removable
Disk”.

→

Stitch pattern data in “Removable Disk” is written to
the machine.

Press .

→

The stitch patterns in the computer are displayed in
the selection screen.

Memo

A maximum of 24 stitch patterns or 476 KB can be
moved or copied to “Removable Disk”.

Note

• While data is being written, do not disconnect the

USB cable.

• Do not create folders within “Removable Disk”.

Since folders are not displayed, stitch pattern data
within folders cannot be retrieved.

Summary of Contents for Innov-is QC1000



































































































































































Search results

Summary of Contents for Innov-is QC1000

Reviews:

Related manuals for Innov-is QC1000

Brands by name

Popular brands

Brother Innov-is QC1000, Operation Manual

Search results

Summary of Contents for Innov-is QC1000

Reviews:

Related manuals for Innov-is QC1000

Brands by name

Popular brands