Brother Innov-is NV4000D, Service Manual

Page: 284 / 381

3 - 152
Main parts Embroidery
28
X sensor PCB assembly cord arrangement
1. Slide the X carriage assembly
1
of the main frame assembly to the right as
far as possible.
2. Hang the lead wire of the X sensor PCB assembly
2
over the left hook
3
on the bottom of the main frame, and then tie it with a band.
3. Slide the X carriage assembly
1
of the main frame assembly to the left as
far as possible
4. Hang the lead wire of the X sensor PCB assembly
2
over the right hook
4
on the bottom of the main frame.
1 4
2
1
3
2
29
E cord supporter attachment
1. Attach the E cord support
1
to the X guide plate with the screw
1
.
*Key point
• Attach the screw 1 to the hole at the left side of the screw 2 .
1
Torque
0.79 – 0.98 N
·
m
1
2 1
Screw, Pan (S/P washer)
M4X8
Color; Silver